高工作电压小感应电流耐压仪（耐电弧放电耐压仪）-（运算机调节）

High voltage low current tester (arc resistance tester) - (computer control)

企业产商品各称称：耐电弧试验机

Product name: electric arc resistance tester

护肤品尺寸：NDH-A

Product model: NDH - A

需要满足标准化：GB/T 1411-2002《固态垃圾绝缘电阻原料耐高压得很低电流大小电弧击穿击穿的测试》（等一起IEC  61621-1997）及ASTM D495等规格的让开发生产加工的，并遵循IEC 149、UL 746A等试验台方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要适用人群使用范围及性能：

本检测机是以适用来电机的、家廷用水器和家廷用家廷用水器等餐饮行业的电焊工用塑胶板材件、不饱和不饱和树脂胶和接地漆等接地装修用料的耐电孤功效评估，主用来物质接地装修用料如：塑胶板材件、透气膜、不饱和不饱和树脂、白云母、淘瓷、钢化玻璃、接地油、接地漆、厚纸板等导电介质的耐电孤功效自测；

本经过多次研究发现机由折算机掌控运动，也可以体现 某一研究动态及研究期限，研究终结后并存有某一研究数据分析，并可印刷.要求實驗意见书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为横竖二合一形式，下部分为运作软件系统，上端为试验装置箱。

2 本产品设备利用*新智能化操控技术设备，顺利通过首选应用程序（IEC或ASTM）可主动对其进行现场实验，并在pc上体现 试验装置步骤和但是。

3 **性能参数比较好，抗电磁波辐射力强，考试的精密性好。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断用时不确定度：小于等于 ±10ms

2 调压器功率：2kVA

3 电机额定功率校正相电压：12.5kV

4 耐压试验电压值高精准度：±3%

5 电压调节精准度：±10%  直流电压估测精准度：1.5%

6 电极片对试件材料压差：（0.5±0.05）N

7 参比电极材质：钨棒

8 电极材料高度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 动用学习环境工作温度：（23±2）℃

10 用室内环境室内温度：（50±5）%

11 电源开关：220V±5%  50Hz  10A

12 耐压    策略：   新国标/美标/10 mA 间断性/20 mA 连续式/30 mA连续性/40 mA连续式

13 试验台编译程序相应：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物料应用：

NDH-A    耐弧光可靠性试验仪-微机操纵

NDH-B    耐电弧放电试验报告仪-触控屏设定

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！